top of page

How to Stop Garmin Glare on a 73sv, 93sv or 106sv

Nov 9
3 min read

Updated: Nov 12

You stop Garmin glare on a 73sv, 93sv or 106sv by shading the screen from direct sun. A rigid sun shade that sits over the display works better than tilting the unit or cranking the brightness, because it blocks the light before it ever hits the glass. On a kayak, where the sun moves all day and you cannot shift the console, a shade is the fix that holds up from launch to load-out. A rigid shade built for your exact model does the job on the water, then folds flat into a protective cover when you are done.



Watch it in action: FoldFlat 2-in-1 Review

Short: FoldFlat Visor in action



Why Glare Happens


Glare is sunlight bouncing off your screen and straight into your eyes. On a kayak it is worse than on a bass boat for a few simple reasons. You sit low, so the screen is close to your face and the sun is often right behind you. The water throws a second layer of reflected light up at the display. And a fish finder screen is a flat sheet of glass. Put those together on a bright day and the sonar picture washes out, even when the unit is working fine. It is not a settings problem. It is a light problem.


Tilting and Brightness Only Go So Far


Most anglers try the free fixes first, and they help a little. Tilting the unit changes the reflection angle, but the sun keeps moving, so you end up re-tilting every half hour. Turning the brightness all the way up makes the picture punch through for a while, but it drains your battery faster, and at high noon it still loses to the sun. Sunglasses cut the glare on the water, but they do not fix the light hitting the screen itself. Those are workarounds. A shade solves the cause.


A Shade Beats a Cover, and a Shade That Is a Cover Beats Both


A soft cloth cover does not shade anything while you are fishing, and a floppy hood catches wind and blocks your view. What works is a rigid shade that holds its shape around the screen, blocking sun from above and from the sides. That is what the FoldFlat Visor does. It is a rigid sun shade and a protective cover in one piece, and it folds flat when you are off the water. So it shades the display while you fish, then folds down to protect the screen on the trailer and in the garage. There is nothing extra to carry and nothing to lose.


Fit It to Your Model


A shade only works if it fits the screen it is shading. The 73sv, 93sv and 106sv are different sizes, so the FoldFlat Visor is made by model. Pick the one that matches your unit, ECHOMAP UHD2 or Ultra in 73sv, 93sv or 106sv, and it fits the display it was made for. Prices run $87.95 to $109.95 depending on the model. Get the fit right once and you will not think about glare again.


Set It Up Once


Start with the shade, then set your unit up around it. Mount the display where you can reach it without leaning, angle it slightly toward you, and leave the brightness at a normal level instead of maxed out. You will see your sonar clearly, your battery will last longer, and you will not spend the day squinting.


FAQ


Will a sun shade really fix glare on a 93sv?


Yes. A rigid shade blocks the sunlight before it reaches the glass, which is the part tilting and brightness cannot fix on their own.


Does the FoldFlat Visor work as a screen cover too?


Yes. It folds flat into a protective cover, so the same piece that shades the screen on the water protects it in transport and storage.


Which model do I order for an ECHOMAP UHD2 73sv?


Order the 73sv version. Pick the visor made for your exact display size, 73sv, 93sv or 106sv, and it will fit.

 
 
 

Recent Posts

See All
How to Mount a Fish Finder on a Kayak

A fish finder only helps if you can read it. A screen buried at your feet, flopping on a loose arm, or washed out by sun is dead weight. Getting the mount right is a one-time job that pays off every t

 
 
 

Comments


bottom of page